2. Vespa GTS 300 – Euro5 – 2023 – ZAPMD3103 / ZAPMD3104 – Parts Crankcase.

These fitting bushings or reference plugs help to be able to press two parts together in the right place so that the holes align neatly. So they act as reference points.

Diameter 11 mm, opening 8.1 mm, length 10 mm.

Mounts on virtually all Vespa and Piaggio scooters, in various locations.

But to be sure, check the list below to see if they are on your model in these sizes.

These fitting bushings or reference plugs help to be able to press two parts together in the right place so that the holes align neatly. So they act as reference points.

Diameter 9.5 mm, opening 6.5 mm, length 15 mm.

Mounts on virtually all Vespa and Piaggio scooters, in various locations.

But to be sure, check the list below to see if they are on your model in these sizes.

These fitting bushings or reference plugs help to be able to press two parts together in the right place so that the holes align neatly. So they act as reference points.

Diameter 9.5 mm, opening 6.5 mm, length 15 mm.

Mounts on virtually all Vespa and Piaggio scooters, in various locations.

But to be sure, check the list below to see if they are on your model in these sizes.

With this silentbloc, the vibrations transmitted by the block to the frame are reduced, which prevents unnecessary wear, rattling noise and increases riding comfort. You need two! Length 30mm, diameter 24mm, opening 10mm. Fits many models, check the list below to see if your model is included before ordering.

This O-ring sits on either side of the intermediate bushing that acts as a hinge for the center mount. This prevents moisture from getting in there with fatal consequences.

Dimensions: 15 x 2.3mm

Original parts on your scooter will make you feel better!

You find this screw/bolt on a lot of models in different places, so always handy to have a few of them in stock. Always use exactly the right prescribed screws and bolts! They have a certain length and thickness for a reason, and the choice of materials has also been considered.

This fitting pin is found in almost all Piaggio and Vespa scooters and whatnot. To be sure, check the list at the bottom of the page.

Dimensions:

• outer diameter 7.5 mm
• inner diameter 6.5mm
• length 12 mm

Use only original parts in your engine!

The dipstick used to check if there is still enough gear oil in the scooter. If you have lost it for a while then you better order some oil right away. We also have a nice one from Zelioni.

This O-ring is around the dipstick used to check the level of the gear oil.