28. Piaggio Zip 50 IGET 4T 3V Euro5 – 45 km/h – 2021-2023 – LBMCD2100 – Parts Rear fender – License plate holder

If damage has occurred to the rear of your Zip 2000 scooter due to frequent use or an accident, you can simply repair the damage with this new original rear cover. It is one complete part covering both the left and right buttocks with an opening for the taillight.

Easy self-assembly.

This speednut RAW is usually on the sheet metal to bolt on a turn signal, for example on zipjes. But this spring clip also holds the headlight rim of GT models in place. Use just the right original spring clip, otherwise the screw won't fit or worse.

If you put a new hood set on your Zip and you can't or don't want to transfer the reflectors left and right (e.g. because they are weathered) then you must have these reflectors.

They are sold individually, so order two!

This is one of the most versatile bolts in the range, you can find it all over the scooter and on almost all models Piaggio produces. Steering wheel, radiator, glove compartment, running board, etc. Always use this original bolt with collar and the correct length, thread, material and color so that your machine is indistinguishable from the real thing.

This is one of the most versatile bolts in the range, you can find it all over the scooter and on almost all models Piaggio produces. Steering wheel, radiator, glove compartment, running board, etc. Always use this original bolt with collar and the correct length, thread, material and color so that your machine is indistinguishable from the real thing.

They sometimes snap off, the rear fenders of zips. Especially if, like us, you wheelies more often than you put on clean underpants.

Fortunately, for a few cents, we supply another beautiful new one.

NOTE: This is the new model with cutouts for the reflector and license plate light.

This is the original speednut, also called spring clip, for the hood sets of various Piaggio and Vespa scooters. This fastener allows you to properly secure your scooter's hoods. Useful if you have lost one or have one that is damaged.

This screw is on most Piaggio and Vespa scooters, among other things to fix turn signals, license plate or things in the variator. Always use exactly the right screws and bolts! After all, they have a certain length and thickness for a reason, and even the choice of material has been considered.

This ring is on several many scooters, and usually holds the license plate holder in place Dimensions:

• Outer diameter 12 mm
• Inner diameter 4.2 mm
• Thickness 1 mm

Original parts are just the right size and made of the right material!

This spring washer is found on many scooters and generally ensures that an electrical wire is secured and stays that way. Original parts are just the right size and made of the right material!

This nut allows you to tighten the license plate holder securely on a wide variety of models. Always use exactly the right original screws, bolts and nuts! They have a certain length and thickness for a reason, and even the choice of materials has been considered.

A red reflector on the back of every vehicle is required by law, including on the rear fender of your scooter. So if you lose the reflector, it is damaged, the wrong color or you have a new rear fender, you must replace it to avoid a fine (and/or WOK status).