18. Vespa Sprint 50 IGET 4T 3V Euro4 – 45 km/h – 2018-2021 – ZAPCA0101 – Parts Exhaust.

Replace the original heat shield on your Vespa's exhaust in case of damage from a crash, for example, or just because you want it to match your style better in terms of color.

Double check below at the specifications to see if this is the right heat shield for your model and version of scooter.

Chrome version is original Vespa/Piaggo. Carbon look, Matte and Gloss Black are Roger Styling.

This is THE screw to secure the heat shield with.

Always use exactly the right screws and bolts! They have a certain length and thickness for a reason, and the choice of materials has also been considered.

This plate belongs around the screw that secures the heat shield to the exhaust.

Dimensions:

• Outside diameter 16mm
• Inner diameter 8.2mm
• Thickness 1mm

Original parts are just the right size and made of the most suitable material!

This rubber ring prevents the heat shield from rattling and insulates heat transfer through the screw.

Appears on many Vespa models, check the list below if in doubt.

Original parts are just the right size and made of the most suitable material!

Allen bolt M8x80 mm. Used, for example, to secure the exhaust with, but of course can also be used for other parts.

This spring washer comes around the bolt that secures the exhaust to the frame, and creates pressure on the threads so that the bolt cannot vibrate loose.

Dimensions:

• Outside diameter 16mm
• Inner diameter 8.2mm
• Thickness 2.2mm

Original parts are just the right size and made of the most suitable material!

Secure the exhaust and prevent leaks, using only this original special nut to prevent damage to the studs or, even worse, to the block.