07. Piaggio Zip 50 IGET 4T 3V Euro5 – 45 km/h – 2021-2023 – LBMCD2100 – Parts Cylinder Head Cover.

Veeg of gebruik pijltjes links/rechts om door de foto's te bladeren.

Let op, alle afbeeldingen op onze site dienen slechts ter illustratie. Het te ontvangen product kán er anders uitzien.

Original Cylinder Head Cover / Valve Cover - Vespa / Piaggio - Euro4 and Euro5 - 1A008608

This cover protects the camshaft, valve rockers, etc.

Only suitable for the 50cc iGet models, check the additional info at the bottom of the page!

28,95 each

2 in stock

Estimated delivery date:22 Jun 2024

Original Rubber Gasket / Labyrinth Plate Valve Cover - Vespa / Piaggio - Euro4 and Euro5 - 849012

This gasket prevents engine oil from entering the air filter.

13,95 each

2 in stock

Estimated delivery date:22 Jun 2024

Vespa Screw M5x10 mm - Phillips head - 430264

You find this screw in a lot of scooters, in a wide variety of places.

Check our construction drawings so you order just the right size, because as everyone knows, "Size matters.

So always use exactly the right screws and bolts! After all, they have a certain length and thickness for a reason, and even the choice of material has been considered.

0,95 each

13 in stock

Estimated delivery date:22 Jun 2024

Original Vespa Flange Bolt M6x16 mm - B016777

This flange bolt is in various Piaggio / Vespa engine blocks e.g. to hold the camshaft in place.

Always use exactly the right prescribed screws and bolts! They have a certain length and thickness for a reason, and the choice of materials has also been considered.

0,95

20 in stock

Estimated delivery date:22 Jun 2024

Original Rubber Gasket Valve Cover - Vespa / Piaggio - Euro4 and Euro5 - 1A000889

This gasket seals the connection of the valve cover with the cooling housing, so nothing can get in or out!

Check below to see if this gasket is suitable for your model of scooter.

6,95 each

3 in stock

Estimated delivery date:22 Jun 2024

Original Gasket Spark Plug Valve Cover - Vespa / Piaggio - Euro4 and Euro5 - B015566

This gasket neatly seals the spark plug connection to the valve cover.

Check below to see if this gasket is suitable for your model of scooter.

4,95 each

2 in stock

Estimated delivery date:22 Jun 2024

NGK Spark plug MR8BI-8 for iGet 3V Euro 4/ Euro 5 engines - 1A010638

Change your spark plug at least every 2,500 kilometers and always install one from NGK so your scooter will always run like clockwork. This is the same spark plug that Piaggo/Vespa mounts as standard.

This is the spark plug for Vespa and Piaggio scooters with the iGet engine.

To be sure, check the list below to see if this spark plug fits your scooter (note the first 5 digits/letters of your Vehicle Identification Number found on your registration certificate)

Original price was: €19,95.Current price is: €16,95. each

27 in stock

Estimated delivery date:22 Jun 2024

Original Upper Cooler Cap Cylinder Head - Vespa / Piaggio - Euro4 and Euro5 - 1A017372

The cooling housing around the cylinder head consists of two parts, this is the upper one.

Only suitable for the 50cc iGet models, check the additional info at the bottom of the page!

26,95 each

5 in stock

Estimated delivery date:22 Jun 2024

Original Lower Cooling Cap Cylinder Head - Vespa / Piaggio - Euro4 and Euro5 - 1A017373

The cooling housing around the cylinder head consists of two parts, this is the lower one.

Only suitable for the 50cc iGet models, check the additional info at the bottom of the page!

17,95 each

4 in stock

Estimated delivery date:22 Jun 2024

Vespa Plate screw 4x30 mm - Phillips head - 259577

Original Vespa screws have just the right thread, thickness, length and strength for the intended application.

You'll find this screw on many models, including for the cylinder head, steering rack and air system.

0,95 each

13 in stock

Estimated delivery date:22 Jun 2024

Vespa Screw Button - Cylinder head housing- 969339

You will find this screw knob on many models, it holds the housing around the cylinder head.

1,95 each

8 in stock

Estimated delivery date:22 Jun 2024

Original Vespa / Piaggio - Rubber Infill Ring / Fitting Ring Cylinder Head Housing- 9 x 14 x 9 mm - B014213

This rubber ring belongs in a mounting hole of the upper cap of the cylinder head housing, so that this housing can be properly secured without passing vibration.

2,95 each

2 in stock

Estimated delivery date:22 Jun 2024

Original Vespa / Piaggio - Fit bushing with flange / collar - 8.3 x 10mm - B014214

The top cap of the cylinder head housing has an eye through which a rubber ring goes.

You slide this bushing in there so that you don't break the plastic of the housing and the rubber ring.

2,95 each

3 in stock

Estimated delivery date:22 Jun 2024

Vespa Screw M5x22 mm - Phillips head - 828662

You find this screw in the cylinder head in a lot of scooters. So pretty important that it's exactly the right one and not one you came across in the barn that looks a lot like it.

Anyway, check our construction drawings so you order exactly the right size, because as everyone knows, "Size matters.

Always use exactly the right screws and bolts! After all, they have a certain length and thickness for a reason, and even the choice of material has been considered.

0,95 each

7 in stock

Estimated delivery date:22 Jun 2024

Vespa Plate Screw 3.8 x 16 mm - Phillips head - 270793

Original Vespa screws have just the right thread, thickness, length and strength for the intended application.

You'll find this screw on many models, including for the cylinder head, steering rack and air system.

0,95 each

20 in stock

Estimated delivery date:22 Jun 2024

Vespa Hose Clamp - 7mm - CM002908

The clamp is on the air filter intake tube.

Use original parts and live happier.

0,95 each

14 in stock

Estimated delivery date:22 Jun 2024

Explosietekeningen van de Technical Drawings