24. Vespa Sprint 50 IGET 4T 3V Euro4 – 45 km/h – 2018-2021 – ZAPCA0101 – Spare parts Interior trim.

Have you bumped the steel noses of your Louboutin's against the leg shield a little too often when stepping on them? Or did you just run into something hard the old-fashioned way? Whatever the reason, we have another fresh leg shield/glove box for you. This is the unsprayed version for damage repair on a scooter painted in a custom color.

Does your scooter's leg shield look out of place? We have new ones for you, sprayed at the factory in the original colors so that the damage is restored invisibly.

On the left and right side of the leg shield, inside your glove compartment, there are oval openings, behind them are screws that secure the leg shield. These openings are covered with a rubber lid to prevent moisture, dirt or items from disappearing into the leg shield.

On the left side of the glove compartment is a raised edge, so your lipstick won't keep rolling out. This one can be loose, so you can lose it. Or worse. Don't panic, tomorrow you can already have a new one!

On the right side of the glove compartment is a raised edge, so your lipstick won't keep rolling out. This one can be loose, so then you can also lose it or worse. Don't panic, tomorrow you can already have a new one!

Torx Bolt M6 x 10 mm with breast.

This is the original speednut, also called spring clip, for the hoods/platework of various Piaggio and Vespa scooters. This fastener allows you to properly secure your scooter's hoods. Useful if you have lost one or have one that is damaged.

This is an original speednut, also called spring clip, for the cowl sets of various Piaggio and Vespa scooters. Also, this clip holds the taillight of Sprint, Primavera and Elettrica models in place, very handy!

Inside the storage compartment of the leg shield, nobody knows why by the way, there is this bump rubber, in the place where with the automatic buddy release is the little pallet to open the buddy manually. Original parts, you know why!

Whereas the 125cc and 150cc models have a button to automatically open the buddy, the 50cc models have a cover cap. This one sometimes wants to fall out, or people press it so hard (because they think it's a button) that it disappears.

If your scooter's glove compartment won't close, and not because it's too full of junk, then the mechanism may be broken. In the mechanism this spring is indispensable, so order it quickly so you can quickly keep your valve closed again.

This rubber strip is around the edge of the storage compartment in the leg shield. This keeps your glove compartment from drafting, and keeps it dry. It also prevents rattling and associated noises from the lid. Original parts, you know why!

Keep your valve......in the same style as the rest of that beautiful Vespa of yours. So this is the unsprayed version for damage repair to your custom color painted Vespa Sprint or Primavera.

Is the hinge broken off? Or do you want the lid in a different color than the rest of your scooter? Whatever the reason, we will quickly help you get a new one in the desired color.

If your scooter's glove compartment won't close, and not because it's too full of junk, then the mechanism may be broken. The mechanism consists of a'cam', a spring and this metal strip/lock plate that attaches to the valve itself.

This screw is widely used for the interior trim on Vespas, as well as in steering wheel covers and headlight assemblies. Original screws turn in as if by themselves 😜!

The flap of the glove box/storage compartment in the leg shield hinges at the bottom at two points. At least, provided these hinge holders are mounted. No tinkering, no fiddling, with an original part it does become beautiful.

If your scooter's glove compartment won't close, and not because it's too full of junk, then the mechanism may be broken. If this lock lever is broken off, or even completely fetched, the valve will no longer work. Order a new one today, you'll have it up and running tomorrow.

By means of 2 parkers and 2 of these plates, the locking cam, of the glove compartment in the leg shield, is held in place such that it can tilt, to allow opening and closing of the lid.

When you push the lock inward to open the glove compartment lid, this little thingy reverses the direction of your push to push the lid outward. Never pay too much for original, order it here!

This bolt not only holds the release lever in place, but also acts as a pivot point for that thing.

Dimensions: M4 x 10mm (total length 23mm)

Original parts, nothing can beat that!

Self-locking M4 nut, fixed = fixed!