05. Vespa Sprint 50 IGET 4T 3V Euro5 – 45 km/h – 2019-2022 – ZAPCD0101 – Parts Cylinder Head

An original cap, or cylinder head, of the 50cc euro5 iGet engine as found under the Vespa Sprint / Primavera and Piaggio Zip, among others.

This poppet holds the valve spring in place.

You need one per valve, replace them all at once and use only the original ones!

When mounting the exhaust, you should put a gasket between the mouth of the exhaust and the cylinder, that's better for the environment, performance ánd it makes less noise.

When replacing (or disassembling and reassembling) the cylinder head, you will need to install a new gasket to ensure that no oil, fuel or air can leak into or out of the system.

Allen bolt M6x80 mm.

Used to secure the cylinder head of many, many Piaggio, Aprilia and Vespa models.

An original bolt is never wrong!

You will find this nut in many Piaggio, Vespa and Aprilia models.

Among others, in the cylinder head, steering column or voltage regulator.

Always use exactly the right screws, bolts and nuts! They have a certain length and thickness for a reason, and even the choice of materials has been considered.

The original temperature sensor for the new euro4.euro5 iGet Sprint / Primavera / Zip scooter models.

CHECK THE LIST BELOW TO SEE IF YOUR SCOOTER IS INCLUDED.

This socket plug is in the cylinder head to seal an opening through which oil would otherwise come out.

Always use original parts in your engine block and avoid unnecessary and expensive damage!