22. Vespa Sprint 50 IGET 4T 3V Euro4 – 45 km/h – 2018-2021 – ZAPCA0101 – Parts Center Stand

It is almost indestructible, but if your scooter's center stand does need to be replaced, you have come to the best place.

This is the original buck or also called a lower stand from Vespa itself, but at Roger Trading prices!

Around this bolt hinges the center strut and it is attached to the sub-frame with it. Dimensions: M10 x 130mm

With this self-locking nut you secure the center stand, rear fork and shock absorbers, among others (depending on the scooter model). Anyway, all things that need to be and stay tight. Therefore, use this original self-locking nut, which is calculated for the mentioned applications. Always use exactly the right screws, bolts and nuts from Piaggio / Vespa ! They have a certain length and thickness for a reason, and even the choice of materials has been considered.

Through this bushing goes the bolt that holds the center strut in place and acts as the hinge.

This O-ring sits on either side of the intermediate bushing that acts as a hinge for the center mount. This prevents moisture from getting in there with fatal consequences.

Dimensions: 15 x 2.3mm

Original parts on your scooter will make you feel better!

The springs of the center stand hold it in place while riding, and help you fold in and out of the center stand. The spring for the outside can be found here.

When you collapse the center stand, it pops against the bottom of the crankcase cover. To absorb the impact, this rubber block sits on the center stand. If you lose the rubber or it is broken, install a new one as soon as possible to prevent damage to the sump cover and noise while driving. Listen to your father and always use an (original) rubber!