08. Piaggio Zip 50 IGET 4T 3V Euro5 – 45 km/h – 2021-2023 – LBMCD2100 – Parts Variator

The original variator of the 50cc iGet Piaggio models Liberty and Zip, and of the Vespa models Sprint and Primavera.

Complete unit incl. rollers, ram plate guides, etc.

Always use genuine parts for all repairs.

The ram plate holds the rollers in the variator in place.

This fits almost all Piaggio / Vespa scooters with a 50cc (or 80cc if you are a little naughty) engine block, check the list 👇🏻.

Original parts = the best choice!

If you replace the variotor rollers when performing maintenance or for any other reason, you should also replace these sliders. Don't skimp on that, you've opened everything up anyway so just do that and save yourself misery.

Check the list below to see if they fit your scooter.

NOTE YOU NEED 3!

With the right roller set, you will get the maximum speed and pulling power from your block. With lighter weights, your engine revs more; with heavier weights, the scooter shifts gears sooner.

Choose the rollers with the right weight for your setup. Choose wisely!

With this Variobus Snel in combination with the right weight of varior rollers your Vespa Sprint or Primavera or Zip scooter will run like a bonnet and will reach a speed of around 35 km/h.

Besides, Uncle Cop can run him all day on his roller bench without finding anything criminal.

Stress-free earlier at your destination, in other words.

Don't forget to replace the V-Belt at service, or you'll end up with a stoppage. And for the price you don't have to miss out, you won't find this original V-Belt from Piaggio/Vespa anywhere cheaper. Dimensions: 18.5 x 8 x 732 mm

Try starting your scooter without this part.

This fits virtually all Piaggio / Vespa scooters with a 50cc (or 80cc if you're a bit naughty) engine block, check the list 👇🏻.

Original parts = the best choice!

If you overhaul your scooter's variator (new rollers, ram plate guides, etc.) don't forget this cooling fin as well.

With our prices, there is no reason to skimp on this.

This part rarely breaks down, but since you can't live without it we always have one for you Fits almost all Piaggio / Vespa scooters with a 50cc engine block, check the list 👇🏻. Original parts = the best choice!

This ring is needed in the variator of most 50cc scooters built or built by Piaggio / Vespa.

Original parts are just the right size and made of the right material!

With this nut you secure the clutch housing!

Always use exactly the right screws, bolts and nuts! They have a certain length and thickness for a reason, and even the choice of materials has been considered.