25. Vespa Sprint 50 IGET 4T 3V Euro4 – 45 km/h – 2018-2021 – ZAPCA0101 – Parts Running Board

Unfortunately, the front fender often gets damaged. Bummer, especially if your scooter was painted in a custom color, or a color that is no longer supplied.

As always, you can count on us. An original unpainted fender quickly and inexpensively at your home, just order here and now.

Pebbles in the tread of your shoe soles, or just inane stepping on them. The running board suffers quite a bit with most.

But, with a brand new running board in the scooter's original color, for this money, you no longer have to be annoyed by the worn-out looks of your current running board.

Order a set of new rubbers right away to make the running board fresh again!

On Vespa Sprint, Primavera, Elettrica, S and LX scooters, this screw is used. You encounter it at the helmet tray and running board.

That's why Piaggio uses these nice black screws with a torx ball head, so if you lose one (or two) replace it with the same one!

This speednut is found on almost every Vespa scooter.

Check the technical drawings of your scooter so you order the right speednut for the right application.

The battery cover, which you often stand with your feet on top of, is prone to scuffs and scratches for this reason.

Of course it can't! Fortunately, you can get a new one from us for next to nothing.

Does your running board look fresh again, too.

This is the original speednut, also called spring clip, for the body parts of various Piaggio and Vespa scooters. This fastener allows you to properly secure your scooter's body parts.

Useful if you have lost one or have one that is damaged.

The original buddy footrest for the left side of the Sprint, Primavera and Elettrica scooter.

DON'T FORGET TO ORDER THE RIGHT FOOTREST TOO!!!

The original buddy footrest for the right side of the Sprint, Primavera and Elettrica scooter.

DON'T FORGET TO ORDER THE LEFT FOOTREST TOO!!!

Secure your scooter's running board with the original screws.

Don't take the risk of running a screw too long through a cable or similar cheap = expensive consequences.

This is the original speednut, also called spring clip, for the hoods/platework of various Piaggio and Vespa scooters.

This fastener allows you to properly secure your scooter's hoods.

Useful if you have lost one or have one that is damaged.

This is an original speednut, also called spring clip, for the cowl sets of various Piaggio and Vespa scooters.

Also, this clip holds the taillight of Sprint, Primavera and Elettrica models in place, very handy!

By default, there are chrome trim strips on either side of the running board of your Vespa Primavera or Sprint (S) with the exception of the Nero Notte version. But maybe you like black strips better or you damaged the strips.

If you want to replace the strips around the leg shield with a different color, you should actually replace them with the same color as well.

They are almost to give at Roger Trading, so give your scooter the look that suits you.

This screw is widely used for the interior trim on Vespas, as well as in steering wheel covers and headlight assemblies.

Original screws turn in as if by themselves 😜!

You may encounter/need this ring in different places depending on the scooter model. Usually in the running board, odometer or headlight.

Original parts are just the right size and made of the right material!

The rubber anti-slip strips on the running board of your Vespa Elettrica, Sprint or Primavera can start to look ugly over time. Not surprising of course since you rest your shoes on them in all weathers.

Buy a new set from us, save rock hard euros and get your scooter looking sleek again!

This cover provides access to the spark plug.

Do you need to replace this cover and is your scooter painted in a unique color, or do you want this cover in a separate color? Then we deliver these, which have never had paint on them.

No matter why you need something, Roger Trading always gives you the best deal!

This cover gives access to the spark plug, but it gets damaged quite often and they also disappear automagically at times.

Of course, it is also an item you can customize to give the scooter a different look, e.g. a black spark plug cover on a white or yellow scooter.

No matter why you need it, Roger Trading always gives you the best deal!

This cover gives access to the spark plug, which of course is no reason to make it look dull.

In particular, this is a part that gives your scooter a really fat look if it is carbon or forged carbon.

No matter what you need, Roger Trading always gives you the best deal!

Original Vespa screws have just the right thread, thickness, length and strength for the intended application.

You'll find this screw on many models, including for the cylinder head, steering rack and air system.

You may encounter these plugs when mounting/dismounting the horn horn, trim, glove box, etc. etc. depending on the model of scooter you are working on.

Always use original plugs, only then it is fixed as it should be.