06. Vespa Sprint 50 IGET 4T 3V Euro5 – 45 km/h – 2019-2022 – ZAPCD0101 – Parts Camshaft – Rocker arm

Both rocker arms in the 50cc Euro4 and Euro5 models Sprint/Primavera, Zip and Liberty rotate/tilt on this shaft.

So there are 2 in the motor of the 3V models.

To be sure, check the list at the bottom of the page to make sure this part will fit your scooter.

Use only original parts in your engine!

This plate holds the camshaft and rocker shafts in place in the 50cc Euro4 and Euro5 models Sprint/Primavera, Zip and Liberty.

To be sure, check the list at the bottom of the page to make sure this part will fit your scooter.

Use only original parts in your engine!

You will find this torx screw in many Piaggio, Vespa and Gilera models.

For example in the Vespa Sprint / Zip engine block to secure the camshaft mounting plate.

Don't risk cheap screws and bolts that may break at unexpected times or similar cheap = expensive consequences.

For a perfect repair, use original parts, especially when it comes to a crucial part like the camshaft.

This camshaft model is suitable for the 50cc iGet Euro5 engines of the Vespa Sprint, Piaggio Zip and Liberty scooters.

This needle bearing holds the camshaft in place and allows it to turn smoothly.

Dimensions:

• outer diameter 32mm
• inner diameter 25mm
• width 12 mm

To rotate the camshaft of Euro5 models, you put the camshaft chain/distribution chain over this sprocket.

Don't tinker but fit original parts, with our prices everyone can afford it!

Among other things, this ring is used to secure and hold the camshaft gear/distribution crown.

An oh so small, but oh so important part. Therefore, always use this original plate with its specific conical shape!

This flange bolt is in various Piaggio / Vespa engine blocks e.g. to hold the camshaft in place.

Always use exactly the right prescribed screws and bolts! They have a certain length and thickness for a reason, and the choice of materials has also been considered.