02. Piaggio Zip 50 IGET 4T 3V Euro5 – 45 km/h – 2021-2023 – LBMCD2100 – Parts Crankcase

Veeg of gebruik pijltjes links/rechts om door de foto's te bladeren.

Let op, alle afbeeldingen op onze site dienen slechts ter illustratie. Het te ontvangen product kán er anders uitzien.

Original Vespa Cylinder Stud - Sprint / Primavera / Zip / Liberty - 3V iGet - Euro4 / Euro5 - M6 x 177 mm - 842161

If the threads of the studs that the cylinder slides over are damaged, or if the studs are warped, don't take an unnecessary risk and put in some fresh ones.

They don't cost a turd and this should be just fine.

3,95 each

6 in stock

Estimated delivery date:16 Jul 2024

Original Radial Bearing Rear Axle - Sprint / Primavera / LX - 83045R

This radial bearing is in the transmission cover (aka reduction cover), check the list below to see if your scooter model is included.

Original bearings have a long life and are tuned for the forces they are designed to handle, don't take a gamble and use only original parts when making repairs.

3,95 each

4 in stock

Estimated delivery date:16 Jul 2024

Original 6204 Bearing Rear Axle - Sprint / Primavera / LX - 20 x 47 x 14 - 434735

This bearing is used in many models to keep the output shaft, aka rear wheel shaft in place, in the transmission cover (if you buy the transmission cover this bearing is already in there), and running smoothly.

Diameter 47mm, opening 20mm, thickness 14mm.

Fits most Vespa and Piaggio 50cc models, but to be sure, check the list below to see if your model is included.

With original parts, it turns out time and time again, you will go like fire!

6,95 each

2 in stock

Estimated delivery date:16 Jul 2024

Vespa Circlip / Seeger ring - a.o. Transmission - 47mm - 006647

This locking clip has a diameter of 47mm.

Normally, this locking clip holds the rear wheel bearing in place in the transmission cover.

An original Vespa or Piaggio part doesn't cost much at Roger Trading either!

0,95 each

6 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Seal Transmission - Sprint / Primavera - 47 x 30 x 6 mm - 478498

This is really a very nice retaining ring, you don't know what you see.

Dimensions:

  • outer diameter 47mm
  • inner diameter 30mm
  • thickness 6mm

 

Only original parts in your block? Then you'll never get a WOK!

3,95 each

3 in stock

Estimated delivery date:16 Jul 2024

Original Silentbloc Shock Absorber / Crankcase - Sprint / Primavera / Zip - 33x24x10 - 666991

This silentbloc is used at the bottom of the rear shock absorber, it slides into the mounting eye of the crankcase, the mounting bolt of the shock absorber then goes through this again.

This keeps it quiet and also makes driving more comfortable. So if the old one has gaped, slide in a new one. If only it were as easy and cheap with everything that gets gelled out!

Length 33mm, diameter 24mm, opening 10 mm.

Fits Vespa and Piaggio 50cc euro4 and euro5 models, to be sure check the list below to see if your model is included.

2,95 each

5 in stock

Estimated delivery date:16 Jul 2024

Original Silentbloc Engine Suspension - Piaggio Zip iGet Models - 30 x 24 x 10mm - 1A008919R

With this silentbloc, the vibrations transmitted by the block to the frame are reduced, which prevents unnecessary wear, rattling noise and increases riding comfort.

You need two!

Length 30mm, diameter 24mm, opening 10mm.

Fits many models, check the list below to see if your model is included before ordering.

Original price was: €8,95.Current price is: €7,95. each

4 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Seal Crankshaft bearing - Sprint / Primavera / Zip / LX - 28 x 17 x 7 mm - 969028

This retaining ring keeps the engine oil where it belongs, in the engine.

In practice, these retaining rings never come out 100% intact when disassembled.

So if you take it out you will have to replace it to make sure that things don't leak later.

4,95 each

4 in stock

Estimated delivery date:16 Jul 2024

Original Crankshaft bearing Left / Vario-side - Sprint / Primavera / Zip / LX - 20x60x13 - 82671R

The bearing on the left side of the block (variator side) that holds the crankshaft and makes it turn smoothly.

Diameter 60mm, opening 20mm, thickness 13mm.

Fits most Vespa 50cc models, but to be sure, check the list below to see if your model is included.

Prices you never have to check with us, they are always right.

17,95 each

8 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Fixing Pin Brake Segment - 56x12 mm - 272921

On this pin hinge the brake segments of the drum brake.

Be sure to use only genuine parts in the brake system, after all, it is your brakes huh.

12,95 each

1 in stock

Estimated delivery date:16 Jul 2024

Original Bronze bushing crankcase cover serving starter motor - Sprint / Primavera / Zip - 12x8x8 mm - 431860

This bronze bushing sits inside the crankcase cover / kickstarter cover and supports the starter motor.

Diameter 12 mm, opening 8 mm, thickness 8 mm.

Fits an awful lot of Vespa and Piaggio scooters, but to be sure, check the list below to see if your model is included.

0,95 each

4 in stock

Estimated delivery date:16 Jul 2024

Original Fitting Pin Vespa / Piaggio - ⌀ 7.5 x 6.5 x 12mm - 277916

This fitting pin is found in almost all Piaggio and Vespa scooters and whatnot. To be sure, check the list at the bottom of the page.

Dimensions:

  • outer diameter 7.5 mm
  • inner diameter 6.5mm
  • length 12 mm

 

Use only original parts in your engine!

3,95 each

9 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Flange bolt M6x55 mm - 478895

This flange bolt is in various Piaggio / Vespa engine blocks e.g. to hold the water pump in place.

Always use exactly the right prescribed screws and bolts! They have a certain length and thickness for a reason, and the choice of materials has also been considered.

1,95 each

20 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Mounting Plate Oil Pump - Sprint / Primavera / Zip / LX - 969625

This plate holds the oil pump in place in many models of Piaggio / Vespa.

5,95 each

5 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Flange Bolt M5 x 12mm - 484123

You'll find this screw/bolt on many models in different places, so always handy to have a few of them in stock.

Always use exactly the right prescribed screws and bolts! They have a certain length and thickness for a reason, and the choice of materials has also been considered.

0,95 each

22 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Copper Gasket - Sprint / Primavera / Zip / LX - 12 x 8.2 x 1 mm - 485703

This gasket ring is used around the gear oil drain plug, among other things.

0,95 each

8 in stock

Estimated delivery date:16 Jul 2024

Stainless steel Allen bolt M8 x 12mm - 269755

Allen bolt M8 x 12 mm, used, among other things, for the gear oil filler hole.

0,95 each

419 in stock

Estimated delivery date:16 Jul 2024

Original Reference Plug / Fitting Bushing - Sprint / Primavera / Zip / LX / GT - models - 6.5 x 9.5 x 15 mm - B015956

These fitting bushings or reference plugs help to be able to press two parts together in the right place so that the holes align neatly. So they act as reference points.

Diameter 9.5 mm, opening 6.5 mm, length 15 mm.

Mounts on virtually all Vespa and Piaggio scooters, in various locations.

But to be sure, check the list below to see if they are on your model in these sizes.

0,95 each

8 in stock

Estimated delivery date:16 Jul 2024

Original Vespa Oil Dipstick Gear Oil - Sprint / Primavera / Zip - 55 mm - 832130

The dipstick used to check if there is still enough gear oil in the scooter.

If you have lost it for a while then you better order some oil right away.

We also have a nice one from Zelioni.

4,95 each

3 in stock

Estimated delivery date:16 Jul 2024

Vespa O-ring Dipstick Gear Oil - Sprint / Primavera / Zip / LX - 14.43 x 9.19 x 2.62 mm - 827085

This O-ring is around the dipstick used to check the level of the gear oil.

0,95 each

6 in stock

Estimated delivery date:16 Jul 2024