Vespa Automatic Monoseat Release Kit – 25 piece

Secure your fuel line neatly and avoid damage to it that could result in expensive problems.

Mounting plate / mounting bracket for the little motor that opens the buddyseat automatically.

Secure your scooter's running board with the original screws. Don't take the risk of running a screw too long through a cable or similar cheap = expensive consequences.  

This is the original speednut, also known as spring clip, for the hoods/platework of various Piaggio and Vespa scooters.

This fastener allows you to properly secure the hoods of your scooter.

Useful if you have lost one or have one that is damaged.

To open the buddy seat with the push of a button, you need, among other things, this little motor.

Mounting bolt for the automatic buddy release.

Dimensions: M4 x 35mm

Self-locking M4 nut, fixed = fixed!

Plastic coupler to connect the buddy release motor and the release cable.

Spring to flexibly connect the buddy release motor to the release cable.

Cable to unlock the buddy seat with the engine/actuator.

The locking plate of your buddy seat must also be secured, and so that's what this holder is for.

Buddy seat fastener for Sprint / Primavera.

Torx Bolt M6 x 10 mm with breast.

With these tiewraps from Vespa, it's secured neatly and most importantly, securely.

Avoid problems and always use the right fasteners, this has been thought about!

Cable to unlock the buddy seat with the lever in the luggage compartment.

Cover plate behind the helmet compartment of the tank for saddles of Vespa 125cc / 150cc models.

Metal pin to which the lever in the luggage compartment that unlocks the buddy is attached.

Pull spring to set the buddy release to 'sharp'.

Luggage compartment lever that unlocks the buddy.

Button / Switch that allows you to unlock the buddy seat automatically. This allows the key to stay in the ignition when you go to refuel or need something from the buddy compartment.