Malossi Need for Speed Bundle.

Complete Multivar Set with 6.1 gram rollers ánd smooth variobus.

With this set you will achieve higher speed and improved acceleration.

Replacing the variator is actually a first and necessary step in boosting the scooter.

From the Malossi brand, so quality of the highest order. Well important because of course you don't want to damage your scooter.

With this transmission kit secondary, also called transmission secondary or gearing, you change the standard transmission ratio on the scooter's rear wheel to the 15/55 ratio, resulting in (even) more speed.

This really only works well if you have also taken other measures that increase the horsepower of the engine.

Otherwise, the acceleration will no longer go well. But combined with a different cylinder, variator and ECU, it runs like crazy. You will be amazed what your scooter is capable of.

NOTE: THIS SET FITS ONLY ON i-GET MOTORS WITH 12 INCH CARTER (EURO4 MODELS AS OF 2018)

With the new MALOSSI 80cc cylinder for the 4T engines you will never be late again, but apart from a high top your scooter finally pulls up really well! How could you ever live without it?

This cylinder is suitable for both the 2V /4V engines and the latest generation engines with 3 valves (iGet models 3V) Euro4 & Euro5 thanks to its special included piston.

BUT CAUTION: For the iGet models, the corresponding Injtronic ECU MUST be purchased with it, otherwise you won't even get the scooter running.

CHECK THE LIST BELOW TO SEE IF THIS CYLINDER FITS YOUR SCOOTER.

If you want to make sure that the various components of the
Need for Speed bundle
are mounted correctly on your expensive scooter, leave it to us. Then you can be sure there will be no damage to the engine and the maximum possible speed will be achieved.